How to replace tub with shower
If you want to replace tub with shower, you need to know that you require undergoing a remodeling project and this means that you will not be able to use the bathroom during this period. It means that at the end, you will get esthetically and expansive addition to your home and this will increase its value. The first thing that you have to do is removing an old bathtub and its framing that was in place. The processes to remove the bathtub vary according to the installation methods that have been used before. Normally, the tubs have to be mounted on the wall studs by the use of the screws while the finish materials can be set or mounted on the mortar bed. Some plumbers may put a tub at the top of the foam that expands and they may not put plastic on it.
The second step in how to replace tub with shower, is to choose the right shower pan when the prior installation has been removed and the place looks as it was before. Even if the plastic pans can be easy to install, they are limited under the dimensions to choose from. Most pans are found in rectangular or square for the walk in shower and pans have to be attached directly on the drain and wall studs. If you are looking to make a custom shower with curved walls, you should look for custom floated concrete.
While dealing with the replace tub with shower, you have to remember that you will need to do additional plumbing. If you had a tub, it means that there will be no pipe running on the wall or the faucet tub for cold or hot water. You have to get the additional pipe that you can use to carry the water to reach new location. You should also keep in mind that you need to add the tiles on the walls if they were not in place.